Charging a battery
There are 4 ways to charge a battery (depending on the available
accessories):
• Put the detector in an empty slot of the DR detector cradle.
• Connect the power adapter with the USB Type-C cable to the DR
detector.
• Connect the DR detector cable to the DR detector and switch on the
System Control Unit.
• Remove the battery from the DR detector and insert it in an empty slot
of the DR detector dual battery charger.
The charge level of the battery is monitored and it is kept at maximum
level until the battery is removed from the battery charger.
Related Links
Safety directions for the DR detector battery on page 73
Safety directions for the power supply on page 70
Topics:
• Charging the DR detector in the DR detector cradle
• Charging the DR detector using the power adapter
• Charging the battery using the DR detector cable
• Charging a battery in the dual battery charger
100 | XD 17, XD⁺17 | Advanced Operating
0434A EN 20210426 1355
To Next Page
Loading...
