Agilent Technologies 1290 Infinity II Technical Note

27
Install Long Life Pump Heads (Quaternary and Flexible Pumps)
Install the Pump Head Assembly
3 Insert the inlet weaver to the inlet valve (1). Fix the weaver
with the plastic screw to the inlet valve (2).
4 Connect the capillary from the outlet adapter on the secondary
pump head to the pressure sensor.
5 Connect the seal wash tubes. 6 Close the doors.
7 Perform a Pump Leak Rate Test.



Agilent Technologies 1290 Infinity II Specifications

General

Brand	Agilent Technologies
Model	1290 Infinity II
Category	Laboratory Equipment
Language	English