26
26
Ordering information Agilent 4284A 20 Hz to 1 MHz precision LCR meter
Note: No test fixture is supplied with the Agilent 4284A.
Furnished accessory: power cable.
Options:
Option 4284A-700: Standard power (2 V, 20 mA, 2 V DC bias)
Option 4284A-001: Power amplifier/40V dc bias (see note 1)
Option 4284A-002: Bias current interface (see note 1, 2)
Option 4284A-004: Memory card
Option 4284A-006: 2 m/4 m cable length operation
Option 4284A-1A7: ISO 17025 compliant calibration
Option 4284A-201: General purpose handler interface (see note 2, 3)
Option 4284A-202: Specific handler interface (see note 2, 3)
Option 4284A-301: Scanner interface (see note 2)
Option 4284A-710: Blank panel
Option 4284A-915: Add service manual
Option 4284A-ABJ: Add Japanese operation manual
Option 4284A-ABA: Add English operation manual
Note 1: Options 4284A-001 and 4284A-002 do not operate simultaneously.
Note 2: A maximum of 2 of the following may be installed at one time:
Options 4284A-002, 4284A-201, 4284A-202, 4284A-301, 4284A-710 (2 each max.)
Note 3: Select either Option 4284A-201 or 4284A-202.
Agilent 4285A 75 kHz to 30 MHz precision LCR meter
Note: No test fixture is supplied with the Agilent 4285A.
Furnished accessory: power cable.
Options:
Option 4285A-700: No DC bias
Option 4285A-001: 40V dc bias (see note 1)
Option 4285A-002: Accessory control interface (see note 1, 2)
Option 4285A-004: Memory card
Option 4285A-1A7: ISO 17025 compliant calibration
Option 4285A-201: General purpose handler interface (see note 2, 3)
Option 4285A-202: Specific handler interface (see note 2, 3)
Option 4285A-301: Scanner interface (see note 2)
Option 4285A-710: Blank panel
Option 4285A-915: Add service manual
Option 4285A-ABJ: Add Japanese operation manual
Option 4285A-ABA: Add English operation manual
Note 1: Options 4285A-001 and 4285A-002 do not operate simultaneously.
Note 2: A maximum of 2 of the following may be installed at one time:
Options 4285A-002, 4285A-201, 4285A-202, 4285A-301, 4285A-710 (2 each max.).
Note 3: Select either Option 4285A-201 or 4285A-202.
Specifications continued on page 27