8
User friendly Interface
Simple front panel operation
• Clearly view the display
• See all instrument settings
• Interactive softkeys for simple control
Directly view all instrument settings and
measurement results on the large LCD
display. This simplifies operation and
improves operator efficiency by minimizing
readout error.
The softkeys simplify front panel operation
by allowing the user to easily change
instrument states by moving the LCD
cursor with cursor keys. The softkeys
will automatically change to reflect the
cursor’s position. This minimizes the
number of menus and key strokes.
Non-volatile memory
• Eliminate costly setup errors
• Increase user productivity
• Archive tests
The instruments contain two types of user
accessible memory; internal and external
(memory cards)
1
. The memory can easily
be used to store measurement setups.
Later, a setup can be loaded back into the
instrument. This reduces test setup errors
and increases the user’s productivity.
The memory can store 10 different instru-
ment states, complete with correction
data and system configuration. Entire
setups including limit information can
now be stored and loaded using either
the internal memory or the memory card
1
.
The memory card
1
system is completely
electronic and is based on EEPROM.
Customized test frequencies
Inserting the memory card
1
1. Need Option 4284A/4285A-004
To Next Page
Loading...
Need help?
General
