46 53220A/53230A User’s Guide
2 53220A/53230A Software Installation and Interface Configuration
Figure 2-4. Agilent Connection Expert Interface Window.
Using the Sockets Protocol For higher performance, instruments added to the
LAN configuration can also use the Sockets protocol. To use this connection,
select ‘Add Address’ from the ‘Add Instruments’ menu (Figure 2-4). In this window,
enter the instrument’s host name or IP address and under ‘Optional Socket Con-
nection’, select ‘Use socket connection’ (Figure 2-5). Note that an instrument can
have both VXI-11 and Sockets connections in the configuration (Figure 2-4).
configured interfaces
To Next Page
Loading...
