Chapter 1: General Information
Specifications & characteristics
1–11
Stat
e Select one channel as clock, specify
other inputs as High, Low or X. Logic
Type: AND or NAND Setup time is 1 ns
and hold time is 0 ns.
Delay by Time Time: 5 ns to 10 ns. The trigger is
qualified by an edge. After the delay, a
rising/falling edge on any one selected
input will generate the trigger.
Delay by Events Events: 1 to 16,000,000 rising or falling
edges. The trigger is qualified by an
edge. After the delay, a rising/falling
edge on any one selected input will
generate the trigger.
Video Triggering 525 lines/60 Hz (NTSC), 625 lines/50 Hz
(PAL). Trigger on any line of Field 1 or
Field 2. User defined triggering: User can
specify sync pulse level, width and
polarity, edge number.
Violation Trigger
Setup/Hold
Modes: Setup, Hold or Setup and Hold.
Select Clock, Thresholds, setup and/or
hold time.
Pulse Width Triggers on pulse width >t or, <t.
Triggers on pulse as narrow as 500 ps.
Transition (Slew Rate) Select Rise Time or Fall Time,
present > t or present < t, thresholds.
Triggers on edges as fast 800 ps.
Accuracy for Glitch, Pulse Width,
and time qualified pattern
1.5 ns to 20 ns:
20 ns to 160 ms
±(20% of setting + 500 ps)
±(3% of setting + 2 ns)
To Next Page
Loading...
Need help?
General
