Agilent Technologies 5977 MSD Operation Manual

45
Agilent 5977B Series Agilent 5975/5977 MSD for OpenLAB CDS
Operation Manual
Agilent Technologies
3
Operating in Electron Ionization (EI)
Mode
Operating the MSD from the Data System 46
Operating the MSD from the GC control panel 47
Configuring the MSD through the Web User Interface (WUI) 51
Operating the 5975/5977 MSD from the local control panel (LCP) 54
eModule mini display readout 61
Front Panel Instrument Status LED 61
The GC/MSD Interface 62
Before You Turn On the MSD 64
Pumping Down 65
Controlling Temperatures 65
Controlling Column Flow 65
Venting the MSD 66
Set MS Analyzer Temperatures 67
Enable the GC/MS Interface and Oven 69
View MSD Temperatures and Vacuum 70
To Calibrate Column Flow Linear Velocity 72
To Run an Autotune 74
To Open the MSD Covers 76
Vent the MSD 77
To Pump Down the MS 79
To Move or Store the MSD 82
This chapter describes how to perform some basic operating procedures for
the Agilent 5975/5977 series GC/MSD using electron ionization.

Agilent Technologies 5977 MSD Specifications

General

Brand	Agilent Technologies
Model	5977 MSD
Category	Measuring Instruments
Language	English