Agilent Technologies 6460 Installation Guide

1 Instrument Installation
Step 2. Prepare to install the system
12 Agilent 6400 Series Triple Quad LC/MS System Installation Guide
Figure 6 Remove shipping screws from back of top panel. The screws to remove are
circled in this picture.
d Remove the shipping brackets (a total of 7). You will need to use a 13-mm
wrench.
Figure 7 Triple Quadruple LC/MS on shipping pallet with covers removed (6460 pic-
tured)

Agilent Technologies 6460 Specifications

General

Brand	Agilent Technologies
Model	6460
Category	Laboratory Equipment
Language	English