Need help?Do you have a question about the Agilent Technologies 6475 and is the answer not in the manual?
General| Model | 6475 |
|---|---|
| Manufacturer | Agilent Technologies |
| Category | Laboratory Equipment |
| Type | Triple Quadrupole LC/MS |
| Polarity | Positive and Negative |
| Scan Modes | MRM, SIM, Product Ion Scan, Precursor Ion Scan, Neutral Loss Scan |
| Ionization Source | Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI) |
| Resolution | Unit Resolution |
| Polarity Switching Speed | 20 msec |
| Weight | Approximately 150 kg |
| Scan Speed | Up to 15, 000 u/sec |
| Dynamic Range | Over 6 orders of magnitude |
Details on CAUTION and WARNING notices for hazards and procedures.
Information on packaging and product end-of-life recycling and disposal.
Covers CE, UK, EMC, and other regulatory compliance statements.
How to get help and connect with other users for support.
Details on front, side, and calibrant delivery system views of the instrument.
Explains instrument status lights and indicators in data acquisition.
Describes ON, OFF, and Standby modes of the instrument.
Overview of ion sources like ESI, APCI, MMI, and AJS.
Explains Autotune and Checktune procedures for instrument calibration.
Steps to start the instrument and configure its status window.
Guides on Checktune, Autotune, and generating tune reports.
How to customize actuals window and schedule tune jobs.
How to monitor baseline, adjust plots, and fix spray stability.
Step-by-step guide for powering the instrument on and off safely.
Instructions on launching the MassHunter Data Acquisition software.
Explanation of key software windows like Instrument Status, Actuals, and Chromatogram Plot.
Steps for conditioning, purging, and setting up LC modules and the MS.
Detailed guide for creating, configuring, and running acquisition methods.
Daily and weekly procedures for Calibrant Delivery System and Sources.
Covers periodic maintenance for CDS, Sources, Nebulizer, Corona Needle, Ion Injector, Rough Pump.
Steps for disinfecting the instrument to prevent illness spread.
To Next Page