4 Basic Operation
Starting the Data Acquisition Software
Agilent 6475 Triple Quad LC/MS System User Guide 41
Starting the Data Acquisition Software
The instructions below include the following assumptions:
• The hardware and software are installed.
• The instrument is configured. For information on configuring your instrument,
refer to the MassHunter Control Panel online Help.
• The LC modules and the Triple Quad LC/MS are turned on, but the LC pump is
not running.
After installation, all of the Agilent MassHunter Workstation Software icons on
your desktop. To start the Data Acquisition program, double-click the Data
Acquisition icon on your desktop, or select Windows Start > Agilent MassHunter
LCMS Acq > Data Acquisition.The Data Acquisition window appears.
When Data Acquisition opens, the software engines automatically start. If you
need to restart them, right-click the Acq System Launcher icon in the system tray,
and click Start Engines.
If you have recently changed LC modules, remember to configure the instrument
again. See the Installation Guide for instructions.
To Next Page
Loading...
