Agilent Technologies 6475 User Manual

3Tuning
Starting the Instrument
Agilent 6475 Triple Quad LC/MS System User Guide 29
Starting the Instrument
1 Follow the procedures in “Starting Up and Shutting Down the Instrument” on
page 39 to begin operation of the instrument.
2 Display the Instrument Status window if it is not visible in MassHunter Data
Acquisition software, in one of the following ways:
• Open a layout that includes the Instrument Status window.
• On the Ribbon, click Instrument Status in the Windows section.
3 Right-click the LC/TQ device pane in the Instrument Status window, and select
On. You can also click the button in the title for the TQ Device Pane in the
Instrument Status window.
4 Monitor baseline and adjust plot if necessary. See “Monitoring Baseline and
Adjust Plot” on page 36.

Agilent Technologies 6475 Specifications

General

Brand	Agilent Technologies
Model	6475
Category	Laboratory Equipment
Language	English