Need help?Do you have a question about the Agilent Technologies 6500 Series and is the answer not in the manual?
General| Type | Q-TOF LC/MS |
|---|---|
| Dynamic Range | 5 orders of magnitude |
| Ion Source | Electrospray Ionization (ESI), Atmospheric Pressure Chemical Ionization (APCI) |
| Scan Speed | Up to 20, 000 amu/second |
| Dimensions | 74 cm (W) |
| Resolution | > 40, 000 FWHM |
Procedures for starting up and shutting down the Q-TOF LC/MS instrument.
Steps for removing and installing different ion sources for the LC/MS system.
Maintenance tasks related to the calibrant delivery system and divert valve.
Procedures for removal, cleaning, and reassembly of the electrospray ion source.
Maintenance for the electrospray interface with Agilent Jet Stream Technology.
Procedures for opening, closing, and maintaining the APCI source.
Cleaning and adjusting the multimode source and maintaining the HPLC-Chip/MS interface.
Steps to remove, clean, and reinstall the ion transfer capillary.
Procedures for opening, closing, and cleaning the manifold and ion optics.
Cleaning the high pressure ion funnel for the 6550 Q-TOF system.
Procedures to maintain the instrument's vacuum system.
Safety warnings and precautions for operating the LC/MS system.
Specifications for environmental conditions for instrument operation.
Information on fuses used in the instrument and their replacement.
To Next Page