Agilent Technologies 6675A Service Manual

152 Backdating
CHANGE 29
In Table 5-11:
CHANGE:
1 ) Microprocessor, Masked U504, from Agilent P/N 1821-0223 to Agilent P/N 1821-0943, Qty. 1.
2) Firmware, Secondary, from Rev. A101.03 to Rev. A.01.05.
3) READ-ONLY MEMORY FRONT PANEL 5080-2208.
CHANGE 30
In Table 5-11:
CHANGE: ROM, Front Panel, U4, Firmware from Rev. A.01.07 to Rev. A.01.08.
CHANGE 31
In Table 5-7:
CHANGE:
1) Heat sink, Ref D400, from Agilent P/N 12050766 to Agilent P/N 1205-0861, Qtv 1.
2) Heat sink, Ref D400, from Agilent P/N 1205-0766 to Agilent P/N 1205-0861, Qty 1.
CHANGE 32
In Table 5-3:
CHANGE: Fuseholder ’Clip Type’ from Agilent P/N 2110-0269 to Agilent P/N 2110-0726 QTY 2.
CHANGE 33
In Table 5-4:
CHANGE: IC Read-Only Memory, U4, Agilent P/N 5080-2208 from Fabricated To Purchased.
CHANGE 34
In Table 5-3:
ADD: Collar RPG P/N 5040-1700 Qty. 2.
CHANGE 35
In Table 5-3:
CHANGE: Part number of the A2 GPIB board from P/N 5060-3399 to P/N 5060-3291.

Agilent Technologies 6675A Specifications

General

Brand	Agilent Technologies
Model	6675A
Category	Power Supply
Language	English