24 7820A GC Site Preparation Guide
1 7820A GC Site Preparation
Site LAN Network
If you intend to connect your system to your site’s LAN
network, you must have an additional shielded twisted pair
network cable.
Agilent Technologies is not responsible for connecting to or establishing
communication with your site LAN network. The representative will test
the system’s ability to communicate on a mini-hub or LAN switch only.
The IP addresses assigned to the instrument(s) must be fixed
(permanently assigned) addresses. If you intend to connect your system to
your site’s network, each piece of equipment must have a unique, fixed
(static) IP address assigned to it.
To Next Page
Loading...
Need help?
General