Agilent Technologies 7820A GC Site Preparation Guide

6 7820A GC Site Preparation Guide
1 7820A GC Site Preparation
Customer Responsibilities
The specifications in this manual outline the necessary space,
electrical outlets, gases, tubing, operating supplies,
consumables, and other usage-dependent items such as
columns, vials, syringes, and solvents required for the
successful installation of instruments and systems.
If Agilent is delivering installation and familiarization services,
users of the instrument should be present throughout these
services; otherwise, they will miss important operational,
maintenance, and safety information.
If Agilent is delivering installation and familiarization services,
delays due to inadequate site preparation could cause loss of
instrument use during the warranty period. In extreme cases,
Agilent Technologies may ask to be reimbursed for the
additional time required to complete the installation. Agilent
Technologies provides service during the warranty period and
under maintenance agreements only if the specified site
requirements are met.
Before contacting Agilent to arrange for installation of your new
GC, you must complete the Site Readiness Certification found in
Appendix A, “Site Preparation Readiness.”
Site Preparation Good Practices
If you are not already familiar with Agilent instruments or with
gas chromatography, prepare for the installation and
familiarization service by doing the following:
• Visit the Agilent web site at www. agilent.com/chem, and
view the 7820A GC information available there.
• Attend one of the Agilent e-Seminars or training classes.
Agilent also provides a variety of training options, from
online training to on-site classes.
Having a basic knowledge of the instrument will enhance any
the familiarization services.

Agilent Technologies 7820A GC Specifications

General

Brand	Agilent Technologies
Model	7820A GC
Category	Watch
Language	English