32 7820A GC Site Preparation Guide
Before Contacting Agilent for Installation
If you have purchased Agilent installation and familiarization
services, it is important that your facility has been completely
prepared for GC installation and operation before the Agilent
service representative arrives. This helps ensure the most
timely and efficient service possible.
Before Agilent will schedule installation, you must certify that
the site has been prepared and that the GC has arrived and is
ready for installation.
To certify your installation site:
1 Prepare the site as described in this manual.
2 Print out the form on the following page.
3 Fill in and return the completed Readiness Certification to
Agilent before arranging for an installation date. See the
form for instructions (next page).
4 Arrange the installation date.
After arranging an installation date, you must still make sure
that the appropriate personnel will be available during the
installation.
Table 4 Agilent contact information
FAX Email
India Hyderabad : +91-40-23116224
Bangalore : +91-80-41665120
Gurgoan : +91-124-4727102
Mumbai : +91-22-30648339
cag_india@agilent.com
China +86 8008201182 yanzl@neower.com
To Next Page
Loading...
Need help?
General