Agilent Technologies 7820A GC Site Preparation Guide

5
Agilent 7820A GC
Site Preparation Guide
Agilent Technologies
7820A GC Site Preparation
Customer Responsibilities 6
Computer Requirements 8
Dimensions and Weight 9
Power Consumption 10
Heat Dissipation 12
Exhaust Venting 13
Environmental Conditions 14
Gas Selection 15
Gas Supply 17
Gas Plumbing 19
Maximum Length of Cables 23
Site LAN Network 24
Basic Tools and Consumables 25
This section outlines the space and resource requirements for
GC and automatic liquid sampler (ALS) installation. For a
successful and timely installation of the instrument, the site
must meet these requirements before beginning installation.
Necessary supplies (gases, tubing, operating supplies,
consumables, and other usage-dependent items such as
columns, vials, syringes, and solvents) must also be available.
Note that performance verification requires the use of helium
carrier gas. Refer to the Agilent Web site at
www.agilent.com/chem for the most up-to-date listing of GC and
ALS supplies and consumables.
If you require any additional clarification on the requirements
described in this manual, please visit the Agilent web site at
www.chem.agilent.com, or contact your Agilent sales
representative.

Agilent Technologies 7820A GC Specifications

General

Brand	Agilent Technologies
Model	7820A GC
Category	Watch
Language	English