Introduction
7890A GC Safety Manual 17
Safety and Regulatory Certifications
The Agilent 7890A GC conforms to the following safety standards:
• Canadian Standards Association (CSA): C22.2 No. 1010.1
• CSA/Nationally Recognized Test Laboratory (NRTL): UL 61010
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The Agilent 7890A GC conforms to the following regulations on
Electromagnetic Compatibility (EMC) and Radio Frequency Interference
(RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326
• AUS/NZ
This ISM device complies with Canadian ICES- 001. Cet appareil ISM est
conforme a la norme NMB—001 du Canada.
The Agilent 7890A GC is designed and manufactured under a quality
system registered to ISO 9001.
Instructions for Disposal of Waste Equipment by Users in the European
Union. This symbol on the product or its packaging indicates that this
product must not be disposed of with other waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city recycling
office or the dealer from whom you originally purchased the product.
To Next Page
Loading...
Need help?
General
