Chapter 1 Specifications
Supplemental Characteristics
17
1
Supplemental Characteristics
Output Programming Range (maximum programmable values)
Low range 0 to 15.45 V/0 to 7.21 A
High range 0 to 30.9 V/0 to 4.12 A
OVP 1 V to 32 V
OCP 0 A 7.5 A
Remote Sensing Capability
Voltage drop Up to 1 V per each lead
Load regulation Add 5 mV to spec for each 1-volt change in the + output lead
due to load current changes.
Load voltage Subtract voltage drop in load leads from specified output
voltage atiing.
Temperature Coefficient, ±(% of output + offset)
Maximum change in output/readback per °C after a 30-minute warm-up
Voltage 0.01% + 3 mV
Current 0.02% + 3 mA
Stability, ±(% of output + offset)
Following a 1 hour warm-up, change in output over 8 hours under constant load, line,
and ambient temperature
Voltage 0.02% + 1 mV
Current 0.1% + 1 mA
Voltage Programming Speed
Maximum time required for output voltage to settle within 1% of its total excursion (for
resistive load). Excludes command processing time.
Full load
No load
Up 50 msec 20 msec
Down 45 msec 400 msec
To Next Page
Loading...
Need help?
General
