62
Remote Interface Reference
• SCPI Command Summary, on page 63
• Simplified Programming Overview, on page 68
• Using the APPLy Command, on page 71
• Output Setting and Operation Commands, on page 72
• Triggering Commands, on page 79
• System-Related Commands, on page 82
• Calibration Commands, on page 86
• RS-232 Interface Commands, on page 89
• The SCPI Status Registers, on page 90
• Status Reporting Commands, on page 98
• An Introduction to the SCPI Language, on page 101
• Halting an Output in Progress, on page 106
• SCPI Conformance Information, on page 107
• IEEE-488 Conformance Information, on page 110
If you are a first-time user of the SCPI language, you may want to refer to these
sections to become familiar with the language before attempting to program the power
supply.
SCPI
SCPI
SCPI
To Next Page
