The Agilent E3633A and Agilent E3634A are high performance 200 watt single-
output dual range programm able DC power sup plies wi th both GPIB and RS-
232 interfaces. The combination of bench-top and system features in these
power supplies provides versatile solutions for your design and test
requirements.
Convenient bench-top features
• Single-output dual range
• Easy-to- us e knob control settings
• Highly visible vacuum-fluorescent display meters
• High accuracy and high resolu tion
• Remote voltage sensing
• Overvoltage and overcurrent protection
• Output o n/off
• Excell ent load and line regulation and low rip ple and noise
• Operating states storage
• Portable, ruggediz ed case with non- sk id feet
• Front and Rear output termi nals
• Retrieving/Scrolling error messages on the display
Flexible system features
• GPIB (IEEE-488) and RS-232 interfaces are standard
• SCPI (Standard Commands for Programmable Instruments) compatibility
• I/O setup easily done from front-panel
• Software calibration, no internal adjustments required
Agilent E3633A and E3634A
DC Power Supplies
To Next Page
