To Next Page

To Previous Page

Chapter 4 Remote Interface Reference

SCPI Conformance Information

107

SCPI Conformance Information

The Agilent E3633A and E3634A DC Power Supplies conform to the ‘1996.0’ version

of the SCPI standard. Many of the commands required by the standard are accepted

by the power supply but are not described in this manual for simplicity or clarity. Most

of these non-documented commands duplicate the functionality of a command already

described in this manual.

SCPI Confirmed Commands

The following table lists the SCPI-confirmed commands that are used by the power

supply.

DISPlay

[:WINDow][:STATe] {OFF|ON}

[:WINDow][:STATe]?

[:WINDow]:TEXT[:DATA] <quoted string>

[:WINDow]:TEXT[:DATA]?

[:WINDow]:TEXT:CLEar

INITiate[:IMMediate]

MEASure

:CURRent[:DC]?

[:VOLTage][:DC]?

OUTPut

[:STATe] {OFF|ON}

[:STATE]?

[SOURce]

:CURRent[:LEVel][:IMMediate][:AMPLitude] {<current>|MIN|MAX|UP|DOWN}

:CURRent[:LEVel][:IMMediate][:AMPLitude]? [MIN|MAX]

:CURRent[:LEVel][:IMMediate]:STEP[:INCRement] {<numeric value>|DEFault}

:CURRent[:LEVel][:IMMediate]:STEP[:INCRement]? {DEFault}

:CURRent[:LEVel]:TRIGgered[:AMPLitude] {<current>|MIN|MAX}

:CURRent[:LEVel]:TRIGgered[:AMPLitude]?[MIN|MAX]

:CURRent:PROTection[:LEVel] {<current>|MIN|MAX}

:CURRent:PROTection[:LEVel]? {MIN|MAX}

:CURRent:PROTection:STATe {0|1|OFF|ON}

:CURRent:PROTection:STATe?

:CURRent:PROTection:TRIPped?

:CURRent:PROTection:CLEar

Agilent Technologies E3634A User Manual

Other manuals for Agilent Technologies E3634A