43
www.agilent.com/find/esg
Data streams 0s, 1s, 01s, 10s, 8-bit pattern, PN9, PN15
Packet types
ACL DH1, DH3, DH5, DM1, DM3, DM5, AUX1
SCO HV1, HV2, HV3, DM1
Control NULL, POLL, ID
Bluetooth device address Valid range: 0000 0000 0000 to FFFF FFFF FFFF Hex
Active member address Valid range: 0 to 7
Payload data patterns 0s, 1s, 01s, 10s, 8-bit pattern, PN9, PN15, user file
Burst power ramp Power ramp valid range: 1 to 10 µs
Ramp settling valid range: 1 to 20 µs
(cannot be more than
10 µs greater than the power ramp setting)
Dirty transmitter test menu
Power ramp valid range: 1 to 100 µs
Ramp settling valid range: 1 to 120 µs
(cannot be more than
20 µs greater than the power ramp setting)
Resolution: 1 µs
Impairments
Frequency offset Valid range: –100 kHz to 100 kHz
Dirty transmitter test valid range: –150 to 150 kHz
Resolution: 1 kHz
Frequency drift
Linear Valid range: –100 kHz to 100 kHz
Resolution: 1 kHz
Sinusoidal Valid range: –100 kHz to 100 kHz
Resolution: 1 kHz
Rate: 300 Hz, 500 Hz, 1.6 kHz
Modulation index Valid range: 0.250 to 0.400
Dirty transmitter test valid range: 0.200 to 0.400
Resolution: 0.001
Symbol timing error Valid range: –50 ppm to 50 ppm
Dirty transmitter test valid range: –150 ppm to 150 ppm
Resolution: 1 ppm
AWGN C/N valid range: 10 dB to 40 dB
Resolution: 1 dB
Seed valid range: 1 to 65535
Clock and gate delay Valid range: 0 to 100 µs
Resolution: (1 µs/oversampling ratio)
Oversampling ratio Valid range: 2 to 20
1 Features subject to change.
Signal Studio for Bluetooth
features
1
To Next Page
Loading...
Need help?
General
