Agilent Technologies E4440A Getting Started Guide

Chapter 6 77
In Case of Difficulty
Before Calling Agilent Technologies
❏ If the necessary equipment is available, perform the functional tests in the
Instrument Messages and Functional Tests document for your analyzer.
❏ If the 10 MHz output is not functioning, verify that it is turned on by pressing
System, Reference, 10 MHz Out to select On.
TIP You can get automatic electronic notification of new firmware releases and other
product updates/information by subscribing to the Agilent Technologies Test &
Measurement E-Mail Notification Service for the PSA Series at:
http://www.agilent.com/find/notifyme‘

Agilent Technologies E4440A Specifications

General

Brand	Agilent Technologies
Model	E4440A
Category	Measuring Instruments
Language	English