Chapter 4
Front-Panel Key and SCPI Command Reference
Measurement keys
266
Front-Panel Key and SCPI Command
Reference
4.4.13 Audio SINAD Measurement
There is only one view available for this measurement.
There are two windows in this view:
• Audio SINAD Numeric Results Window (upper)
• Audio SINAD Settings Window (lower)
Table 4-35 Audio SINAD Numeric Results Window
Name Corresponding Results
Audio SINAD n=1,1st
Audio SINAD
Audio SINAD Ratio n=1, 2nd
This result will replace Audio SINAD when Display
Mode is Ratio
Table 4-36 Audio SINAD Settings Window
Name Corresponding Results
Detector Selection It can be Peak +, Peak −, Peak +/– 2 or RMS
Peak Hold It can be On or Off
HP Filter It can be None, 50 Hz or 300 Hz
LP Filter It can be None, 3 kHz, 15 kHz, 30 kHz or 300 kHz
BP Filter It can be None or CCITT Weighing if PSA firmware
revision A.11.08 or above, or Option 23B is installed.
To Next Page
Loading...
Need help?
General
