Chapter 1 35
Introduction
Installing Optional Measurement Personalities
Memory Upgrade Kits
The PSA 64 MByte Memory Upgrade kit part number is E4440AU-ANE. The
PSA Compact Flash Upgrade kit part number is E4440AU-115.
For more information about memory upgrade kits, contact your local sales or
service office, or see:
http://www.agilent.com/find/sa_upgrades
Loading an Optional Measurement Personality
You must use a PC to load the desired personality option into the instrument
memory. Loading can be done from a firmware CD-ROM or by downloading the
update program from the internet. An automatic loading program comes with the
files and runs from your PC.
You can check the Agilent internet website for the latest PSA firmware versions
available for downloading:
http://www.agilent.com/find/psa_firmware
NOTE When you add a new option, or update an existing option, you will get the updated
versions of all your current options as they are all reloaded simultaneously. This
process may also require you to update the instrument core firmware so that it is
compatible with the new option.
Depending on your installed hardware memory, you may not be able to fit all of
the available measurement personalities in instrument memory at the same time.
You may need to delete an existing option file from memory and load the one you
want. Use the automatic update program that is provided with the files. Refer to the
table showing “Measurement Personality Options and Memory Required” on
page 34. The approximate memory requirements for the options are listed in this
table. These numbers are worst case examples. Some options share components
and libraries, therefore the total memory usage of multiple options may not be
exactly equal to the combined total.
Obtaining and Installing a License Key
If you purchase an optional personality that requires installation, you will receive
an “Entitlement Certificate” which may be redeemed for a license key specific to
one instrument. Follow the instructions that accompany the certificate to obtain
your license key.
To install a license key for the selected personality option, use the following
procedure:
NOTE You can also use this procedure to reinstall a license key that has been deleted
during an uninstall process, or lost due to a memory failure.
To Next Page
Loading...
Need help?
General
