Agilent Technologies E444xAU Option H37 Service Guide

222 Chapter 10
Replaceable Parts Lists and Locations
What You Will Find in This Chapter
What You Will Find in This Chapter
The following information is found in this chapter:
1. Part number tables for assemblies, mechanical parts, cables, front
panel connectors, and labels.
2. Part location diagrams for the following:
Fig. 10-1 External Hardware page 249
Fig. 10-2 Top Brace Hardware page 250
Fig. 10-3 Front Frame Hardware page 251
Fig. 10-4 Major Assemblies page 252
Fig. 10-5 RF Section E4440A, E4443A, E4445A - Standard page 254
Fig. 10-6 YTO Assembly page 256
Fig. 10-7 RF Input Connector E4440A, E4443A, E4445A page 258
Fig. 10-8 RF Section Cables E4440A, E4443A, E4445A - Standard page 260
Fig. 10-9 RF Section and Cables E4440A, E4443A, E4445A -
(Options 1DS, BAB, B7J, and AYZ)
page 262
Fig. 10-10 Option 122 or 140 RF Cable Locations page 262
Fig. 10-11 E4440A, E4443A, E4445A Option 123 Assemblies and
Cable Locations
page 264
Fig. 10-12 E4440A, E4443A, E4445A Option 123 Assemblies and
Cable Locations
page 264
Fig. 10-13 E4440A, E4443A, E4445A - Option 110 (with Option
123)
page 266
Fig. 10-14 RF Section E4446A, E4447A, E4448A - Standard page 268
Fig. 10-15 Options 110 and 123 E4446A, E4447A, E4448A page 270
Fig. 10-16 Options 110 and 123 E4446A, E4447A, E4448A (Rear
View)
page 272
Fig. 10-17 RF Input Connector and Attenuators E4446A, E4447A,
E4448A
page 274
Fig. 10-18 RF Section Cable Locations E4446A, E4447A, E4448A -
Standard
page 276
Fig. 10-19 SBTX Driver Board Ribbon Cable Locations E4446A,
E4447A, E4448A
page 278
Fig. 10-20 RF Section Assembly and Cable Locations E4446A,
E4447A, E4448A - (Options 1DS, B7J, and AYZ)
page 280
Fig. 10-21 Vertical Board Assembly Cables page 282

Agilent Technologies E444xAU Option H37 Specifications

General

Brand	Agilent Technologies
Model	E444xAU Option H37
Category	Measuring Instruments
Language	English