Agilent Technologies E444xAU Option H37 User Manual

Chapter 2 117
Instrument Functions: A - L
File
Instrument Functions: A - L
2.6.1.1 Type
Allows you to select the desired type of instrument-data files to be displayed. Common
types of instrument data files include trace data, limit line data, and amplitude correction
data. See
“File Types” on page 114 for more information The catalog displays all files (if Type
is set to
All) or files of the currently selected file type. All directories are always displayed.
Key Path:
File, Catalog
State Saved: Type is not saved in the instrument state
Factory Preset: Type survives
Factory Preset and *RST, but is set to State at power on.
Remote Command:
There is no remote command for this key.
2.6.1.1.1 All
Displays all files located in the selected directory. If selected, it applies to
Catalog, Delete,
Copy, and Rename.
Key Path:
File, Catalog, Type
Type Format Destination Extension
State State STA
Trace Trace + state Trace 1, 2, 3, or all traces TRC
Comma separated trace values Trace 1, 2, 3, or all traces CSV
Limit Internal data format LIM
Screen Bitmap GIF
Reverse bitmap GIF
Corrections Internal data format ANT, CBL, OTH,
and AMP
Measurement
Results
Comma separated values CSV

Agilent Technologies E444xAU Option H37 Specifications

General

Brand	Agilent Technologies
Model	E444xAU Option H37
Category	Measuring Instruments
Language	English