Agilent Technologies E444xAU Option H37 User Manual

174 Chapter 3
Instrument Functions: M - O
Marker
Instrument Functions: M - O
:CALCulate:MARKer[1]|2|3|4:X:SPAN?
Returns the spacing of the markers in frequency.
Example: CALC:MARK3:MODE SPAN selects marker 3 and sets it to
Span Pair.
CALC:MARK4:X:POS:SPAN 200 sets the spacing between the markers to
200 trace points for marker pair 4.
CALC:MARK2:X:POS:CENT 300 sets the midpoint between the markers to
the 300th trace point from the left of the display. For a 601 point trace this
will be the middle of the display.
3.1.6 Off
Turns off the selected marker. In addition, Off turns off functions related to the selected
marker such as
Signal Track, Band/Intvl Power, and Marker Noise and removes marker
annotation from the display.
Key Path:
Marker
Remote Command:
See “Select Marker” on page 169 for the command to select the control mode.
Example: CALC:MARK3:STAT OFF selects marker 3 and sets it to
Off.

Agilent Technologies E444xAU Option H37 Specifications

General

Brand	Agilent Technologies
Model	E444xAU Option H37
Category	Measuring Instruments
Language	English