Agilent Technologies E444xAU Option H37 User Manual

Chapter 4 215
Instrument Functions: P - Z
Print
Instrument Functions: P - Z
4.3 Print
Initiates an output of the display data to the currently defined printer. The screen remains
frozen (no further sweeps are taken) until the data transfer to the printer is complete.
Refer to the key description for Print Setup on page 215 for more information about the
printer functions.
There must be a valid printer set up for the print function to work. The Getting Started
Guide includes additional printer installation information.
If you need to abort a print in progress, use the
Esc (escape) key.
Key Path: Front-panel key
Remote Command:
:HCOPy[:IMMediate]
Example: HCOPY
4.3.1 Abort the Printout (Remote Command Only)
This command aborts the print that is currently in process.
Remote Command:
:HCOPy:ABORt
Example: HCOP:ABOR

Agilent Technologies E444xAU Option H37 Specifications

General

Brand	Agilent Technologies
Model	E444xAU Option H37
Category	Measuring Instruments
Language	English