Agilent Technologies E444xAU Option H37 User Manual

130 Chapter 2
Instrument Functions: A - L
File
Instrument Functions: A - L
2.6.3.4 Destination
When Type is set to Trace, Destination allows you to direct your data to Trace 1, Trace 2, or Trace
3
for a single-trace file. If the data is for all three traces (Source was All when they were
saved), the data will be returned to the original trace registers, regardless of the
Destination
setting.
When
Type is set to Limits, Destination allows you to direct your data to Limit 1 or Limit 2.
Key Path:
File, Load
State Saved: Not saved in Instrument State.
Factory Preset: Trace file format, is All Traces at power on.
2.6.3.4.1 Trace 1
Selects trace 1 for the trace data to be loaded into.
Key Path:
File, Load, Destination
State Saved: Not saved in Instrument State.
Factory Preset: Not affected by
Preset. Power up and Restore Sys Defaults sets Trace 1.
2.6.3.4.2 Trace 2
Selects trace 2 for the trace data to be loaded into.
Key Path:
File, Load, Destination
State Saved: Not saved in Instrument State.
Factory Preset: Not affected by
Preset. Power up and Restore Sys Defaults sets Trace 1.

Agilent Technologies E444xAU Option H37 Specifications

General

Brand	Agilent Technologies
Model	E444xAU Option H37
Category	Measuring Instruments
Language	English