Agilent Technologies G1329A Reference Manual

130
Repairing the Autosampler
Installing the Top Cover and Foam
Installing the Top Cover and Foam
Frequency When accessing internal parts.
Tools required If interface board installed: Flat-head screwdriver.
Parts required None.
1 Install the top foam. Press the foam firmly
into place.
2 Engage the slot on the top plate onto the side
plate.
3 Fix the top plate in place with the three
screws.
4 Engage the top cover into the bottom cover.
CellFrame
CellFrame

Agilent Technologies G1329A Specifications

General

Brand	Agilent Technologies
Model	G1329A
Category	Laboratory Equipment
Language	English