Agilent Technologies G1329A Reference Manual

144
Repairing the Autosampler
Needle-Drive Motor and Belt
Needle-Drive Motor and Belt
Frequency When defective
Tools required Pozidrive No. 1 screwdriver
Parts required Needle-drive motor 5062-8590
Belt 1500-0697
Before beginning this procedure:
❏ Remove the top cover (page 128).
14 Lift away the drive belt.
15Disconnect the motor connector from the SUD
board (labelled “Needle M”).
16Remove the metering head assembly (see
“Gripper Arm” on page 123).

Agilent Technologies G1329A Specifications

General

Brand	Agilent Technologies
Model	G1329A
Category	Laboratory Equipment
Language	English