Agilent Technologies G1329A Reference Manual

64
Troubleshooting and Test Functions
Open Cover
Open Cover
The top foam has been removed.
The sensor on the ASM board detects when the top foam is in place. If the
foam is removed, the fan is switched off, and the error message is generated.
Probable Causes • The top foam was removed during operation.
• Foam not activating the sensor.
• Sensor defective.
Suggested Actions ❏ Replace the top foam.
❏ Exchange the ASM board.

Agilent Technologies G1329A Specifications

General

Brand	Agilent Technologies
Model	G1329A
Category	Laboratory Equipment
Language	English