Agilent Technologies G1329A Reference Manual

155
Repairing the Autosampler
Power Supply
4 Lift the power supply out of the module. 5 Remove the coupler from the of the power
supply.
6 Insert the coupler onto the switch of the new
power supply.
7 Install the power supply in the module.
8 Connect the light pipe to the coupler. 9 Install the bottom foam. Ensure the cables
are positioned as shown.
CellFrame
CellFrame
CellFrame
CellFrame
CellFrame

Agilent Technologies G1329A Specifications

General

Brand	Agilent Technologies
Model	G1329A
Category	Laboratory Equipment
Language	English