Agilent Technologies G1329A Reference Manual

163
Parts and Materials
Sampling Unit Assembly
Table 18 Autosampler Sampling Unit Assembly
,WHP 'HVFULSWLRQ 3DUW1XPEHU
Sampling unit assembly for G1313A
Sampling unit assembly for G1329A
Sampling unit assembly for G1389A
Sampling unit assembly for G2260A
(The assy comes without injection valve and analytical head)
G1313-60008
G1329-60008
G1329-60018
G2260-60008
1 Sampling unit connector board (SUD) G1313-66503
2Belt gear for metering unit and needle arm 1500-0697
3 Stepper motor for metering unit and needle arm 5062-8590
4 Loop capillary (100 µl) for G1313-29A / G2260A
Loop capillary (40 µl) for G1389A
Loop capillary (8 µl) for G1389A
Loop ext. capillary (900 µl) for G1313-29A / G2260A
Union for (900 µl) loop extension capillary
01078-87302
G1329-87302
G1375-87303
G1313-87303
5022-2133
5 Analytical head assembly (100 µl) for G1313-29A
Analytical head assembly (40 µl) for G1389A
Preparative head assembly (900 µl) for G1313-29A (P<200Bar)
Preparative head assembly (900 µl) for G2260A (P<400Bar)
01078-60003
G1377-60013
G1313-60007
G2260-60007
6 Inj. valve - Anal. head cap (160 mm 0.25 mm) for G1313-29A
Inj. valve - Anal. head cap (200 mm 0.05 mm) for G1389A 20 µl FS
Inj. valve - Anal. head cap (200 mm 0.10 mm) for G1389A 100 µl FS
Inj. valve - Prep. head cap (160 mm 0.50 mm) for G2260A
G1313-87301
G1375-87302
G1375-87312
G2258-87301
7 Injection valve assembly for G1313-29A
Injection valve assembly for G1389A
Injection valve assembly for G2260A
0101-0921
0101-1050
0101-1267
8 Leak sensor 5061-3356
9 Waste tube injection valve assy (120 mm) for G1313-29A / G2260A
Waste tube injection valve assy (120 mm 0.25 mm) for G1389A
G1313-87300
G1377-87301
10 Safety cover G1329-44105

Agilent Technologies G1329A Specifications

General

Brand	Agilent Technologies
Model	G1329A
Category	Laboratory Equipment
Language	English