Agilent Technologies G1329A Reference Manual

240
Theory of Operation
Setting the 8-bit Configuration Switch
Switches 1 and 2 do not force storage of this set of parameters in
non-volatile memory. Returning switches 1 and 2 to other positions (other
than being both up) will allow for normal operation.
If you use the following switch settings and power the instrument up again,
the instrument firmware stays in the resident part, that is, it is not
operable as a detector. It only uses basic functions of the operating system
for example, for communication.
To return to normal operation, set switches back to your GPIB or RS-232C
configuration settings.
Table 60 Stay Resident Settings
Mode Select12345678
TEST/BOOT11001000

Agilent Technologies G1329A Specifications

General

Brand	Agilent Technologies
Model	G1329A
Category	Laboratory Equipment
Language	English