46 Agilent InfinityLab LC Series 1260 Infinity II Isocratic- and Quaternary Pumps User Manual
2
Site Requirements and Specifications
Performance Specifications
Instrument Control Lab Advisor B.02.08 or above
LC and CE Drivers A.02.14 or above
For details about supported software versions refer to the compatibility
matrix of your version of the LC and CE Drivers
Local Control Agilent Instant Pilot (G4208A) B.02.20 or above
Communications Controller-area network (CAN), Enhanced Remote Interface: ready,
start, stop and shut-down signals, LAN onboard
Safety and
maintenance
Extensive diagnostics, error detection and display through Agilent
LabAdvisor, leak detection, safe leak handling, leak output signal for
shutdown of the pumping system. Low voltage in major maintenance
areas.
GLP features Early maintenance feedback (EMF) for continuous tracking of
instrument usage in terms of seal wear and volume of pumped mobile
phase with pre-defined and user settable limits and feedback
messages. Electronic records of maintenance and errors
Housing All materials are recyclable
Table 7 Performance Specifications 1260 Infinity II Quaternary Pump (G7111B)
Type Specification
To Next Page
Loading...
Need help?
General
