5
Technical Information
Maintenance Actions
74/102 HS452, HS652 Rotary Vane Pumps User Manual / 87-900-978-01 (H)
oil leaks;
slack joints or couplings.
Maintenance technicians must:
be aware of all applicable national directives concerning accident
prevention during work on motor-driven pumps and should
know how to apply them;
have read and understood all the sections on “Safety Rules";
be familiar with the essential design features and operation of
the pump;
know how to use and consult the pump documentation;
be concerned about proper operation of the pump;
make a note of any irregularities in operation of the pump and
take the necessary action, where appropriate.
Use original spare parts wherever possible and repair a broken part
as best as possible on site or send it back to the manufacturer for
repairs.
For all problems arising, or to order spare parts, refer to our service
department.
Agilent Technologies Italia S.p.A.
Vacuum Products Division
Via F.lli Varian, 54
10040 Leinì (TO)
ITALY
To Next Page
Loading...
Need help?
General
