EasyManua.ls Logo

Agilent Technologies TriScroll 600 Series - User Manual

Agilent Technologies TriScroll 600 Series
19 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TriScroll™ 600 Series
Dry
Scroll
Vacuum
Pump
Ma
nu
al N
o.
6
9990
4
305
R
evis
ion E
November
20
14
.
..
:
~y
..
Agilent
Technologies
.
~
".
Vacuum Products Division
MOD
ULE
REPLA
CEMENT
MANUAL
CE
I

Table of Contents

Other manuals for Agilent Technologies TriScroll 600 Series

Preview: Major Maintenance Manual
Major Maintenance Manual102 pages
Preview: Installation And Operating Manual
Installation And Operating Manual56 pages

Questions and Answers

  • K
    Katelyn RogersAug 3, 2025
    What to do if my Agilent Technologies TriScroll 600 won’t start?
    • S
      Sara GrayAug 3, 2025
      If the Agilent Technologies Water Pump won't start, several factors could be the cause. First, check if the circuit breaker is open and close it, identifying any overload issues. The motor thermal protector might also be open; allow the motor to cool and identify any overload. Inspect for electrical shorts under the motor cover and repair them, or check for loose or cut wiring and repair or replace it. Excessive voltage drop could be a problem, so check the size and length of the power supply cable. Finally, a defective motor could be the reason, requiring inspection, and contacting Agilent.
  • A
    Amy CamachoAug 13, 2025
    Why does the Agilent Technologies TriScroll 600 have poor ultimate pressure?
    • F
      Francisco NicholsAug 13, 2025
      If your Agilent Technologies Water Pump has poor ultimate pressure, it could be due to several reasons. A system leak might be present, so locate and repair it. There might be water or solvent in the pump; flush the pump with air or dry nitrogen, and install a trap or filter if solvent is the issue. A plugged gas ballast could also cause this, so replace the breather vent and contact Agilent. Worn-out seals may also be the problem, requiring replacement of the tip seals. Lastly, poor conductance to the pump can cause this issue; replumb with shorter and/or larger diameter tubing.
  • T
    tamara27Aug 22, 2025
    How to fix a hammering noise in Agilent Technologies TriScroll 600?
    • L
      Lawrence ConleyAug 22, 2025
      If your Agilent Technologies Water Pump is making a hammering noise, it could be due to overheating. Check the ambient temperature and ventilation to the pump. Alternatively, there might be debris in the pump. Check the inlet screen and flush the pump. If necessary, disassemble the pump and inspect it.

Summary

Preface and Safety Considerations

Safety Considerations

Information on hazards, warnings, cautions, and notes during maintenance procedures.

Related Manuals and Maintenance Kits

Related TriScroll Manuals

Lists associated manuals for installation, operation, and maintenance.

Maintenance and Tool Kits

Information on kits and tools required for pump maintenance and rebuilds.

Service Options and Contact Information

Factory Service Options

Details available factory services like advance exchange and rebuilds for pump modules.

Contacting Agilent

Provides customer service contact numbers and website for support.

General Information and Required Equipment

General Information

Overview of pump design, service life, and maintenance recommendations.

Equipment and Tools for Module Installation

Lists the pump module and specific tools, including hex keys, needed for installation.

Maintenance Tool Kit - Page 9

Key Tools for Pump Maintenance

Highlights essential tools like bearing fixtures, installation tools, and wrenches.

Maintenance Tool Kit - Page 10

Specialized Bearing and Seal Tools

Details specialized tools for bearing extraction, pre-load, and seal installation.

Measurement and General Tools

Includes measurement tools, hex keys, and general-purpose tools.

TriScroll Disassembly Steps

Intake Assembly Removal

Procedure for removing screws, the intake assembly, and its O-ring.

Cowling and Module Removal

Steps to remove cowling screws, cowling, and the pump module from the frame.

Fan Assembly and Crankshaft Disassembly

Procedure for removing fan assembly screw, fan assembly, and crankshaft key.

TriScroll Reassembly Steps

Required Tools and Components

Lists required tools and identifies components for pump reassembly.

Crankshaft and Fan Assembly Reassembly

Procedure for installing the crankshaft key and securing the fan assembly.

Motor Coupling and Pump Module Installation

Procedure for inserting the spider and installing the pump module onto the frame.

Frame and Cowling Securing

Procedure for securing the pump module to the frame and installing the cowling.

Intake Fitting Reassembly

Procedure for installing the O-ring, intake assembly, and securing the fitting.

Pump Conditioning and Performance Verification

Agilent Technologies TriScroll 600 Series Specifications

General IconGeneral
BrandAgilent Technologies
ModelTriScroll 600 Series
CategoryWater Pump
LanguageEnglish

Related product manuals