Agilent Technologies PSA Series User Manual

196 Chapter 3
Instrument Functions: M - O
MODE and Mode Setup
Instrument Functions: M - O
Remote Command Notes: Select the measurement mode. The actual available choices
depend upon which modes (measurement applications) are installed in the
instrument.A list of the valid choices is returned with the INST:CAT?
query.
Once an instrument mode is selected, only the commands that are valid for
that mode can be executed.
BASIC
CDMA1XEV (1xEV-DO)
CDMA2K (cdma2000)
EDGEGSM (GSM with EDGE)
LINK (89600 VSA Link software)
NADC
NFIGURE (noise figure)
PDC
PNOISE (phase noise)
SA
TDSCDMA
WCDMA (3GPP)
Example: INST SA
INST?
3.6.1 Spectrum Analysis
Selects the spectrum analysis measurement mode for your analyzer.
Key Path:
Mode
Remote Command:
:INSTrument[:SELect] SA
Example: INST SA
INST?

Agilent Technologies PSA Series Specifications

General

Brand	Agilent Technologies
Model	PSA Series
Category	Measuring Instruments
Language	English