Agilent Technologies PSA Series User Manual

Chapter 4 237
Instrument Functions: P - Z
SWEEP
Instrument Functions: P - Z
Remote Command:
[:SENSe]:SWEep:EGATe:POLarity NEGative|POSitive
[:SENSe]:SWEep:EGATe:POLarity NEGative|POSitive?
Example: SWE:EGAT:POL NEG
SWE:EGAT:POL?
4.8.5.3 Delay
Controls the length of time from the time the gate condition is satisfied until the gate is
enabled.
Key Path:
Sweep, Gate Setup
State Saved: Saved in instrument state
Factory Preset: 57.7 microsecond
Resolution: 100 ns
Range: 0.0
µs to 100 seconds
Remote Command:
[:SENSe]:SWEep:EGATe:DELay <time>
[:SENSe]:SWEep:EGATe:DELay?
Example: SWE:EGAT:DEL 100US
SWE:EGAT:DEL?
4.8.5.4 Length
Controls the length of time that the gate is enabled.
Key Path:
Sweep, Gate Setup
State Saved: Saved in instrument state
Factory Preset: 461.6
µs
Range: 10
µs to 0.5 s
Remote Command:
[:SENSe]:SWEep:EGATe:LENGth <time>
[:SENSe]:SWEep:EGATe:LENGth?
Example: SWE:EGAT:LENG 1ms
SWE:EGAT:LENG?

Agilent Technologies PSA Series Specifications

General

Brand	Agilent Technologies
Model	PSA Series
Category	Measuring Instruments
Language	English