Chapter 2 89
Instrument Functions: A - L
Det/Demod
Instrument Functions: A - L
Key Path: Det/Demod
History: Added with firmware revision A.6.0
Remote Command:
See “Detector” on page 79.
Example: DET MPOS
2.4.1.11 RMS (Remote Command Only)
Selects the Average Detector. If
BW/Avg, Avg/VBW Type is set to Auto (or Pwr Avg) this will
yield the RMS voltage (average power) for each trace point. (See 3.4.1.3, Average)
Key Path: There is no key selection for this setting, but you can access it by using
Average Detector (see “Average” on page 83).
Remote Command:
See “Detector” on page 79.
Example: DET RMS
To Next Page
Loading...
Need help?
General
