AHT Cooling Systems GmbH
page 9
Safety by handling of glass
• Glass breakage hazard. Cutting injuries to the body. Impact injury.
►Do not install units with multi-pane insulating glass at altitudes above 2000 m (6562 ft).
Multipane insulating glass can break due to air pressure differences.
►Do not apply a load onto the glass lids.
► Check for damage (crack, fissure, breakage) of the glass lids/glass elements. In the event
of damage, contact the maintenance service immediately (see → chapter 10.4).
►Do not climb onto or into the unit.
►It is prohibited to store glass containers when operating below 0°C (32°F).
►Check breakage of glass containers when operating above 0°C (32°F).
Disposal of broken glass. Cutting injuries to hands.
►Wear protective gloves to remove splintered glass parts and the possibly damaged goods.
►Remove all splintered glass parts and damaged goods carefully and completely.
Dispose of splintered glass parts in an environmentally friendly manner.
Residual risks
The manufacturer assumes no liability for any damage caused by failure to observe these instructions.
To Next Page
Loading...
Need help?
General
