AHT PARIS 185 User Manual

en | AHT Cooling Systems GmbH Safety | 2
405859_1_0819 31 / 505
2.5.3 Mechanical hazards
WARNING
Transport of the appliances with indus-
trial trucks.
Risk of injury to persons in the event of a colli-
sion.
▪ Observe transport routes for industrial
trucks.
▪ Secure transported goods.
▪ Only trained personnel may operate
industrial trucks.
▪ Observe the stacking height specifications
on the packaging.
Appliance tipping hazard.
Persons may become trapped.
▪ Do not climb onto or into the appli-
ance.
Missing and/or not fully functional
safety devices.
Risk of injury, e.g. from rotating parts.
▪ Check to ensure safety devices are
complete and working.
▪ Do not remove protective devices
and covers attached to the appli-
ance.
CAUTION
Material breakage.
Falling hazard. Cuts.
▪ Do not climb onto or into the appli-
ance.
▪ Do not apply any load to the lid.
Falling objects.
Impact injuries. Cuts in the event of glass
breakage.
▪ Do not set down any objects on the
appliance.
Leakage of condensation water.
Slipping hazard.
▪ Check for puddles in front of and un-
der the appliance.
▪ Promptly remove leaking condensa-
tion water.
▪ Contact the maintenance service
promptly (see → Maintenance ser-
vices).
Opening / closing the lid.
Hands (body parts) may be trapped.
▪ When opening / closing, do not reach
into the opening gap.
▪ Look out for other persons when open-
ing/closing the lid.
Safety when handling glass
CAUTION
Glass breakage.
Body cuts. Impact injuries.
▪ Do not install appliances with lami-
nated insulating glass at altitudes
above 2000 m (6562 ft). Laminated
insulating glass may break due to air
pressure difference.
▪ Check glass elements for damage,
e.g. cracks, breaks. In the event of
damage, promptly contact the
maintenance service (see → Mainte-
nance services).
▪ Do not apply any load to the glass lid.
▪ Do not climb onto or into the appliance.
▪ It is forbidden to store glass contain-
ers in freezers.
Dispose of broken glass.
Hand cuts.
▪ Use protective gloves to remove split
glass parts and goods that may have
been damaged as a result.
▪ Carefully and completely remove all
split glass parts and damaged goods.
2.5.4 Residual risks
The manufacturer accepts no liability for damage
caused by non-compliance with this manual and other
manufacturer specifications.

AHT PARIS 185 Specifications

General

Brand	AHT
Model	PARIS 185
Category	Commercial Food Equipment
Language	English