AHT PARIS 185 User Manual

10 | Operation AHT Cooling Systems GmbH | en
40 / 505 405859_1_0819
WARNING
Electrostatic discharge and spark for-
mation with flammable refrigerant.
On a damaged / leaking refrigerant circuit, sparks
may ignite escaping refrigerant. Fire hazard.
▪ Use a damp cloth or sponge to re-
move condensation water.
▪ Do not use dry cloths or sponges to
dry the appliance.
10.1 Loading
CAUTION
Material breakage.
Falling hazard. Cuts.
▪ When loading, do not climb onto or
into the appliance.
Falling objects.
Impact injuries.
▪ Do not set down any objects on the
appliance.
Opening / closing the lid.
Hands (body parts) may be trapped.
▪ When opening / closing, do not reach
into the opening gap.
▪ Look out for other persons when
opening/closing the lid.
Low temperature.
Frostbite to skin.
▪ Wear protective gloves when loading.
NOTICE
Property damage due to misuse.
▪ Only add goods to the appliance once the
specified temperature for the product has
been reached.
▪ Adhere to loading specifications.
▪ Carefully add goods.
▪ Open the lid only temporary for loading and
removing the goods.
▪ Close the lid immediately after loading.
The goods are accessed by opening the lid from above.
Temperature display (see → Temperature display).
Loading specification
The stacking limit is marked by stacking markers in the
appliance.
–
Loading is only permitted up to the stacking
mark made on the inside.
Fig. 8: Stacking mark
10.2 Shutdown and restart
WARNING
Work on the electrical system.
Contact with live parts may result in electric
shock.
▪ Only qualified staff may carry out
work on the electrical system.
▪ Observe the electrical safety rules
prior to commencing work.
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
tion.
10.2.1 Shutdown
Reasons for shutdown by qualified staff
–
Service, repair (see → Maintenance, service,
and repairs)
Reasons for shutdown by operating personnel
–
Damage to appliance
–
e.g. broken lid
WARNING
Shutdown of the appliance.
Contact with live parts may result in electric
shock.
▪ Only trained operating personnel
may disconnect the appliance.
▪ Disconnect the appliance and secure
it against reconnection.
Steps for shutdown
–
Move the goods to another appliance with the
same product temperature class.
–
Disconnect the appliance:
1. Switch off the cooling function (see → Operating
elements and display indicators).
2. Switch off all circuit breakers (for fusing, see →
Fusing) of the affected appliance and secure
against reconnection.
3. Switch off the appliance circuit by removing the
mains plug and secure against reconnection (see
→ Electrical connection).
Longer shutdown
–
Carry out the steps for shutdown.
–
Bring the appliance to room temperature.
–
Carry out basic cleaning (see → Basic clean-
ing).
–
Leave the lid open.
NOTICE
Material damage during prolonged shutdown.
▪ Do not expose the appliance to heat radia-
tion.
▪ Do not place anything in or on the appliance.
▪ Store the appliance in a stable operating po-
sition (horizontal alignment).

AHT PARIS 185 Specifications

General

Brand	AHT
Model	PARIS 185
Category	Commercial Food Equipment
Language	English