210 Software Library Reference Manual for VME 429
Appendix A – Document/Software History
Table A-I Summary of Changes for each Version Update
Version General or S/W Function
Change
Description
5.3x
Revision A
General Initial Port from Api Documentation
5.3x
Revision B
General Corrected address of AIM USA
- Corrected “systems functions” overview table (chapter 40.)
Api429CmdBiuIntrCheck was written incorrect
- Moved replay mode description from end of function
Api429CmdTxXferRead to end of function
Api429CmdTxReplayData
Api429CmdIni Corrected format of description of parameter ‘chn_cnt’
Api429ReadBSPVersion
Api429ReadBSPVersionEx
Corrected purpose description
Api429CmdRamRead
Api429CmdRamWrite
Api429ReadBiuData
Api429WriteBiuData
Corrected prototype description
Api429ReadBlockMemData
Api429WriteBlockMemData
Corrected values for parameter ‘memtype’
Api429ReadMemData
Api429WriteMemData
- Corrected values for parameter ‘memtype’
- Deleted description for parameter ‘size’ since the parameter
is not available
Api429CmdReplayStatus Corrected description of parameter ‘ul_StartAddr’
5.4x
Revision A
General No changes in this Manual – However, the VME Generic
Reference Manual has been updated.
5.4x
Revision B
General Restructured document from Appendices to Sections.
Function call/parameter description clarifications throughout.
Added constant names defined in the header file for
parameter values within multiple functions.
VMEuserInterruptFunctions
Updated the Interrupt Log List Event Entry 1 to include the
replay stop interrupt (RSTP) and Replay Half buffer
interrupt (RHFI) flags. Also corrected type from MIT to
MTI.
Updated the Interrupt Log List Event Entry 2 to include the
replay next buffer pointer (RNBP)
Clarified the INDI interrupt occurs when the buffer index is
reached and when buffer index reload occurs.
Api429CmdTxXferDef Clarified the INDI interrupt occurs when the buffer index is
reached and when buffer index reload occurs.
Added note to clarify that transfer counting enabled requires
that lcen in Api429CmdReset is set to 1.
xfer_gap – removed text indicating that a gap can be inserted
with a NOP Label instruction. This is a future capability.
Api429CmdSceDef Clarified definition for b_Label parameter
Api429CmdTxReplayData Clarified delay time description
Api429CmdReplayStatus Corrected ul_Size and clarified ul_StartAddr.
Api429CmdRxIni Clarified b_ModeExt parameter
To Next Page
Loading...
