Software Library Reference Manual for VME 429 211
Appendix A – Document/Software History
Version General or S/W Function
Change
Description
Api429CmdTxStatusRead pb_TxStatus – removed status values 3 – 6 – they are not
supported yet.
5.6x
Revision A
Api429SetDllDbgLevel Added
Api429CmdRmFuncBlkDef Increased range of parameter fb_id from 22 to 30
Api429CmdReset
dded note to Api429CmdReset parameter chn_cfg, that on
AMC429 the upper 16 channels can’t be selected.
Scenario Function Overview Added note, that scenario does not work on an APM429
General Corrected chapter “2.1 Api429.h”
- corrected constant API429_MAX_IR_EVENT_BUF
Api429CmdBiuIntrCheck Corrected name of constant API429_MAX_IR_EVENT_BUF
Api429CmdTxXferDef Added new value for parameter ‘xfer_type’ Æ label transfer
with timetag on send
Extended description of parameter ‘xfer_gap’ due to new
value of xfer_type
Api429CmdRxGetBufAddress Corrected description of parameter ‘pl_Addr’
Api429CmdRxLabCon Extended description of parameter ‘b_Sdi’
Api429CmdRxLabDataRead Extended description of parameter ‘lab_data’
Api429CmdSceDef
Api429CmdSceClr
Api429CmdSceIni
Api429CmdSceCtl
Api429CmdSceRead
Added note that APM boards are not supported
Api429CmdSceDef Extended description of parameter ‘init_data’
Extended description of parameter ‘fld[].type’
Extended description of parameter ‘fld[].lsb’
Extended description of parameter ‘fld[].func’
Extended description of parameter ‘fld[].range’
Api429CmdTxXferReadEx Added
Api429CmdTxXferDataRead Added
Ai429VmeModuleOpen Added
AiVMEModuleListBuild
AiVMEModuleListBuildEx
AiVMEMemoryMap
AiVMEInitInterrupt
AiVMEFreeModuleList
Moved from VME Generic Reference Manual.
Added Note, that a certain define is now needed in the
compiler.
5.7x
Revision A
Api429CmdTxStartEx Added
Api429CmdReset Renamed parameter “px_Cmd->padding1” to
”px_Cmd->tx_clock_sel”
Api429CmdGetIrigTime
Api429CmdSetIrigTime
Added parameters ‘mode’, ’irig_src’ and ’irig_sync’
Api429CmdTxFrmTimeIni
Changed range of w_Ftm from 0..13107 to 1..13107
Api429CmdTxFrmTimeIniEx
Changed range of w_Ftm from 0.. 65535 to 1..65535