Aiphone JP-4HD - Assigning an ID to station [ID SETTING]; Initializing station [INITIALIZE]

11
PART NAMESINSTALLATION USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Assigning an ID to station
[ID SETTING]
The ID setting should be made to all the sub master stations
*
individually.
Do not assign the same ID to two or more sub master
*
stations.
From
1
the [INSTALL] menu window, touch
ID SETTING
.
"2" to "8" are displayed.
The current ID number is highlighted.
To change the ID number, touch the number until
2
highlighted
.
Touch
3
ENTER
to save ID
.
When ID is changed, this station will be rebooted.
*
Initializing station [INITIALIZE]
By initializing this station, all settings return to default.
From th
1
e [INSTALL] menu window, touch
INITIALIZE
.
A notice message is displayed.
Touch
2
YES
to continue initializing.
To cancel initializing, touch
NO
.
Identifying software version
[SOFTWARE VERSION]
You can identify the software version of this station. Use this
item when doing maintenance etc.
From the [INSTALL] menu window, touch
SOFTWARE VERSION
.
The ID number and software version of this station will be
displayed.