Aiphone JP-4HD - Door release settings [GENERAL] - [DOOR RELEASE]

17
PART NAMESINSTALLATION USING THE SYSTEM APPENDIX
SETTING AND ADJUSTMENT
Enabling/Disabling the operation sound
[GENERAL] - [SOUND SETTING] -
[AUDIBLE TOUCH TONE]
You can make this station sound a beep whenever the
touchscreen is touched.
From HOME window, touch
1
SETTINGS
→
GENERAL
→
SOUND SETTING
.
Touch
2
AUDIBLE TOUCH TONE
and select
“ENABLE” or “DISABLE”.
Touch
3
ENTER
to save change.
Enabling/Disabling door release
[GENERAL] - [DOOR RELEASE]
You can make it possible (ENABLE) or not (DISABLE) to
release door locks from this station.
Set for Door 1 to Door 4 individually.
If "DOOR1" is set to "ENABLE", when receiving a call from
a door station or while monitoring an entrance,
1
and
2
are displayed on the screen. Touching
1
activates the door release device for Door 1.
If it is set to "DISABLE",
1
and
2
are grayed out
and disabled.
From HOME window, touch
1
SETTINGS
→
GENERAL
→
DOOR RELEASE
.
Enter the 4-digit PIN by using the touchscreen, then
2
touch
ENTER
.
“DOOR1” to “DOOR4” are displayed.
If a wrong PIN has been entered, an error message
*
is displayed. Enter correct PIN. (See page 15 for PIN
settings).
To change the setting for “DOOR1”, select “ENABLE”
3
or “DISABLE”.
Repeat for other door stations.
4
When the setting has fi nished, touch
5
ENTER
.
Adjusting brightness and volume
[ADJUST]
You can adjust the brightness of the screen and sound
volumes.
From HOME window, touch
1
SETTINGS
→
ADJUST
.
The setting window appears.
..........Adjusts brightness of the screen.
.........Adjusts the speaker volume when talking in
hands-free mode.
..........Adjusts the output volume when talking with
handset.
...........Adjusts the volume of call tone from door
station(s).
.........Adjusts the volume of call tone from other
residential station(s).
(for calling both a single station and all
stations)
Volume adjustment range: 0 (mute), 1 - 10
Touch
2
or to adjust the levels.
Touch
3
ENTER
to save change
.